Ladders for Billboard and Outdoor Advertising Crews

Ladders for Billboard and Outdoor Advertising Crews

An outdoor advertising crew climbs the same structure every week and changes a face that acts like a sail. The height is fixed, the wind is not, and the access is usually a fixed ladder or a catwalk that was designed for maintenance rather than for a crew carrying a rolled panel.

Getting Up a Billboard Structure

Most bulletin structures have a fixed ladder up one leg or a central column, sometimes with a cable safety system, sometimes with nothing but rungs. Where the fixed ladder is damaged or the crew needs a different point, a portable extension ladder has to reach a landing that is 30 feet up or more.

That means a 32 or 40 foot ladder, set at four to one, with the top three feet above the landing and the feet on solid ground. Our extension ladder range goes to 40 feet, and the Werner Type IAA fiberglass 7120-2 at $424 is the heavier duty option when a worker is carrying tools up.

Never lean a portable ladder against a sign face, a stringer or the vinyl itself. All three will bend, tear or deform under a point load.

Changing the Face

A bulletin vinyl is 14 by 48 feet, which is a sail with a printed message. Two people on a catwalk working a rolled panel in a breeze is the most dangerous part of the job, and the wind does not have to be strong to take control of it.

Work from the catwalk with both feet on the deck, not from a ladder rung, and use ropes to control the panel before it is released. Keep the catwalk clear of tools and the old vinyl so nobody trips on a fold.

Set a wind limit for panel work and stick to it. Fifteen to twenty miles an hour is a sensible cutoff for a full bulletin face, and in Texas a spring afternoon gets there most days.

Catwalks and Fall Protection

A catwalk with a rail is a platform. A catwalk without one, or with a rail that has been hit by equipment, is an open edge at 40 feet. Where the structure has a cable system, use it; where it does not, the crew needs a harness and an anchor that a qualified person has approved.

Our 50 foot fall protection kit is $89.38 and covers a harness, lanyard and anchor strap for maintenance work. It is a starting point, not a substitute for a structure-specific plan.

Keep the lanyard above the worker where the anchor allows it, and never clip to a handrail, a conduit or a light bracket. Those are not anchors, and a fall generates a load that will tear them off.

Wind, Weather and Texas Afternoons

Billboard work is weather work. Vinyl gets brittle in a cold snap, adhesive fails in the heat, and a thunderstorm can build in twenty minutes on a flat Texas afternoon. Watch the radar before the climb, not after the panel is half hung.

Lightning is the other reason to get off a steel structure early. If thunder is close enough to hear, the crew should already be down.

Ground Crew and Securing the Site

The ground crew controls the site: cones and a spotter on the shoulder, tools in a bag rather than on the deck, and a rope for anything that goes up or down. A dropped wrench from 40 feet is a fatal object.

Lock the gate and the ladder when the crew breaks. An unattended billboard ladder is an invitation, and the liability lands on whoever left it open.

Never lean on the face: Vinyl, stringers and sign faces are not structural.

Harness on the catwalk: A rail is not a fall protection system if it has been hit.

Billboard Work Is Structural Work

A billboard kit is one long fiberglass extension ladder, a harness and anchor strap, and a way to control a panel in the wind. The rest is discipline about the face and the forecast.

Tell us the structure height and landing layout and we will match the ladder.

Everything ships from 5030 Dexham Rd. Ste. 103 in Rowlett, TX, and local crews can pick up the same day. Call 972-331-1090 and we will tell you what is on the floor right now.

Shop Fall Protection

Harnesses, lanyards and anchor straps in stock in Rowlett.

Shop Fall Protection
Nov 17th 2026 Noah Khomer

Recent Posts